- Product Name
- Specifications
- Frequently Asked Questions
- Related Products
- Product Reviews
Shiva Amvaj Digital Super Timer is a timer with very high accuracy and efficiency, usable over a wide time range (from 0.1 seconds to 999 hours). This timer can also work as a flasher in 4 modes: tenth of a second, second, minute, and hour. The Shiva Amvaj super timer can be used as an on-delay timer. The power supply of this timer is separate from the START terminal.
Product Models
Code:
14JN3
Weight:
107 gr
Dimensions:
36*90*65 mm
IP:
30
Supply Voltage:
180-250VAC /50-60 HZ
Operating Conditions:
دما: ۶۵+..۲۰– درجه سانتی گراد و رطوبت : ۷۰درصد
Output:
رله 5A
Features of Shiva Amvaj Digital Super Timer
High-accuracy microprocessor system (0.1 seconds)
Has a display
Large: time
Small: operating mode
REL: LED
Has 8 different operating modes:
Timer: 1. tenth of a second 2. second 3. minute 4. hour
Flasher: 5. tenth of a second 6 .second 7. minute 8. hour
Setting the relay state (connected or disconnected) at the start of timing
Installation guide for Shiva Amvaj Digital Super Timer
Install the digital super timer inside the panel or at the installation site. To mount it on the panel door, use the Shiva Amvaj panel frame. You can get the panel frame and rail free of charge from sales representatives. After mounting the device, wire it according to the diagram. Note that after the start input is connected, this timer begins timing according to the set program. To time again, simply disconnect its Start input; the timer is then ready for reuse with the previously set value.
