- Product Name
- Specifications
- Frequently Asked Questions
- Related Products
- Product Reviews
The Shiva Amvaj super digital timer is a timer with very high accuracy and performance, usable over a wide time range (from 0.1 seconds to 999 hours). This timer can also operate as a flasher in 4 modes: tenth of a second, second, minute and hour. You can use the Shiva Amvaj super timer in 2 modes: off-delay timer and on-delay timer. Its power supply is separate from the START terminals, and it is available in 2 models with AC and DC power supply.
Product Models
Code:
14B2
Weight:
150 gr
Dimensions:
72*86*60 mm
IP:
30
Supply / Start Voltage:
180-250VAC /50-60 HZ
Operating Conditions:
دما: ۶۵+..۲۰– درجه سانتی گراد و رطوبت : ۷۰درصد
Output:
رله 5A
Features of the Shiva Amvaj Super Digital Timer
High-accuracy microprocessor system (0.1 seconds)
Display for
Time Value: Time
Mode: Operating mode
Rel: Relay on
8 different operating modes:
Timer: 1. Tenth of a second 2. Second 3. Minute 4. Hour
Flasher: 5. Tenth of a second 6. Second 7. Minute 8. Hour
Relay state (on or off) can be set at the start of timing
Installation Guide for the Shiva Amvaj Super Digital Timer
You can install the super digital timer inside a panel, on a rail or on any other surface. If the installation location has no rail, you can use the rail inside the box. To install it on a panel door, use the Shiva Amvaj panel frame. After installing the system, connect its terminals according to the relevant file and install the device power supply circuit. Note that after the start input is connected, this timer starts timing in two ways, off-delay timer and on-delay timer, according to the programmed setting. To time again, simply disconnect its Start input, and the timer is ready for reuse with the previously set value.
